Move Ref-Data & Add my first shot

data/x2s5823/_info.yaml

@@ -0,0 +1,20 @@
+long_name: "Shot 1 - Fat Probe - 2024-10-15"
+name: "Shot 1"
+date: "2024-10-15"
+
+shot-info: 
+  name: "x2s5823"
+
+probe-info:
+  type: "Fat"
+  c2c: 5.6 # mm
+  gauge-diam: 3.05 # mm
+  gauge-c2c: 4 #mm
+  data-record:
+    type: "scope"
+    config: "eProbe-Scope.txt"
+    data-file: "eProbe-Scope.csv"
+    trigger:
+      type: "scope"
+      delay: 0
+

data/x2s5823/eProbe-Scope.txt

@@ -0,0 +1,24 @@
+ANALOG
+Ch 1 Scale 200mV/, Pos 185.00mV, Coup DC, BW Limit Off, Inv Off, Imp 1M Ohm
+     Probe 10.000000 : 1, Skew 0.0s
+Ch 2 Scale 200mV/, Pos 177.00mV, Coup DC, BW Limit Off, Inv Off, Imp 1M Ohm
+     Probe 10.000000 : 1, Skew 0.0s
+Ch 4 Scale 1.00V/, Pos 1.93700V, Coup DC, BW Limit Off, Inv Off, Imp 1M Ohm
+     Probe 1.0000000 : 1, Skew 0.0s
+
+TRIGGER
+Sweep Mode Auto, Coup DC, Noise Rej Off, HF Rej Off, Holdoff 40.0ns
+Mode Edge, Source Ch 4, Slope Rising, Level 1.00000V
+
+HORIZONTAL
+Mode Normal, Ref Center, Main Scale 500.0us/, Main Delay -100.000000us
+
+ACQUISITION
+Mode High Res, Realtime On, Vectors On, Persistence Off
+
+MEASUREMENTS
+Average - Full Screen(1), Cur -7.5mV
+Average - Full Screen(2), Cur  >-4.3mV
+Average - Full Screen(3), Cur No signal
+Average - Full Screen(4), Cur 2.3810V
+

data/x2s5823/x2s5823.config

@@ -0,0 +1,48 @@
+# x2s5823 config file
+# This files contains a text version of the National Instruments PXI unit configuration data.
+# Channels are represented as one line per configured signal with tab-separated values.
+#
+# Line content and types of values (first item is item 0):
+# i  item            type        comments
+# --------------------------------------------------------------------------------------------------------
+# 0  signal name     string    
+# 1  channel ID      string    legacy I/O channel designation
+# 2  external gain   float     1 if there is no external amplifier connected
+# 3  sensitivity     float     volts per measured unit (of the transducer)
+# 4  units           string    name of units for physical quantity (e.g. kPa)
+# 5  position        float     position of transducer (in mm)
+# 6  serial number   string    transducer identity 
+# 7  PXI channel ID  string    non-legacy channel ID and trigger source
+#---------------------------------------------------------------------------------------------------------
+
+sd1            	2 0 9	     1	9.500000E-4	kPa	0.000	112A24-9609    	PXI1Slot2/ai0	
+sd2            	2 1 9	     1	9.500000E-4	kPa	0.000	113A22-9535    	PXI1Slot2/ai1	
+sd3            	2 3 9	     1	6.820000E-4	kPa	0.000	112A24-2676    	PXI1Slot2/ai3	
+st1            	2 4 9	     1	1.482000E-2	kPa	0.000	112A22-35071   	PXI1Slot2/ai4	
+st2            	5 4 9	     1	1.168700E-2	kPa	0.000	112A22-35070   	PXI1Slot5/ai4	
+st3            	2 6 9	     1	1.450000E-2	kPa	0.000	112A22-19126   	PXI1Slot2/ai6	
+at1            	3 0 9	     1	1.443000E-2	kPa	0.000	112A22-35098   	PXI1Slot3/ai0	
+at2            	3 1 9	     1	1.450000E-2	kPa	0.000	112A22-9050    	PXI1Slot3/ai1	
+at3            	3 2 9	     1	1.447980E-2	kPa	0.000	112A22-19124   	PXI1Slot3/ai2	
+at4            	3 3 9	     1	1.435000E-2	kPa	0.000	112A22-34424   	PXI1Slot3/ai3	
+at5            	3 4 9	     1	1.447000E-2	kPa	0.000	112A22-34425   	PXI1Slot3/ai4	
+at6            	3 5 9	     1	1.442000E-2	kPa	0.000	112A22-34426   	PXI1Slot3/ai5	
+at7            	2 7 9	     1	1.451000E-2	kPa	0.000	112A22-35096   	PXI1Slot2/ai7	
+at8            	3 7 9	     1	1.490000E-2	kPa	0.000	112A22-35079   	PXI1Slot3/ai7	
+pimax4         	5 1 9	     1	1.000000E-3	mV	0.000	pimax4         	PXI1Slot5/ai1	
+trigbox        	5 7 9	     1	1.000000E-3	mV	0.000	trigbox        	PXI1Slot5/ai7(Trigger)	
+trigbox_delay  	5 5 9	     1	1.000000E-3	mV	0.000	trigbox_delay  	PXI1Slot5/ai5	
+pt1            	5 2 9	     1	8.500000E-4	kPa	0.000	SN-22554       	PXI1Slot5/ai2	
+irc800         	8 4 9	     1	1.000000E-3	mV	0.000	irc800         	PXI1Slot8/ai4	
+shimadzu       	8 6 9	     1	1.000000E-3	mV	0.000	shimadzu       	PXI1Slot8/ai6	
+pimax3         	8 7 9	     1	1.000000E-3	mV	0.000	pimax3         	PXI1Slot8/ai7	
+Phantom        	8 2 9	     1	1.000000E-3	mV	0.000	phantom        	PXI1Slot8/ai2	
+pt2            	6 1 9	     1	1.440000E-3	kPa	0.000	SN 22556       	PXI1Slot6/ai1	
+pt3            	6 2 9	     1	1.810000E-3	kPa	0.000	SN 7446        	PXI1Slot6/ai2	
+pt4            	6 3 9	     1	7.300000E-4	kPa	0.000	SN LW30649     	PXI1Slot6/ai3	
+pt5            	8 3 9	     1	7.350000E-4	kPa	0.000	SN LW30651     	PXI1Slot8/ai3	
+pt6            	6 5 9	     1	7.290000E-4	kPa	0.000	SN LW30652     	PXI1Slot6/ai5	
+pt7            	6 6 9	     1	7.220000E-4	kPa	0.000	SN 22514       	PXI1Slot6/ai6	
+pt8            	3 6 9	     1	1.430000E-3	kPa	0.000	SN 16785       	PXI1Slot3/ai6	
+pt9            	5 0 9	     1	1.010000E-3	kPa	0.000	SN 7430        	PXI1Slot5/ai0	
+photodiode     	8 0 9	     1	1.000000E+0	mV	0.000	photodiode     	PXI1Slot8/ai0	

data/x2s5823/x2s5823.txt

@@ -0,0 +1,157 @@
+--------------------------------------------------------------------------------
+Project.........................................Mars entry non-equilibrium expanding flows
+Run number................................ x2s5822
+Date............................................10/10/2024
+Blame...........................................Mragank, Matt
+Condition................................... Mars condition, high density, Mars mixture
+Reservoir.....................................  6.75 MPa
+Driver............................................83520 Pa 90% He, 92.8 kPa Argon
+Primary diaphragm.................... 2 mm scored, cold rolled steel 6U374
+Shock tube................................... 13000 Pa ( Mars mixture)
+Secondary diaphragm................  10 micron mylar
+Acceleration tube....................... 650 Pa lab air (set on new gauge on the bottom of the dump tank)
+Trig.............................................. Pt5 (changed as wedge is ahead of pitot probes) slot8ai3 on tee piece 8ai4 - cable pt5
+Lab environment...................... N/A
+Driver Condition........................x2-lwp-2.0-90-0
+
+
+
+
+--------------------------------------------------------------------------------
+EXPERIMENT SETUP
+
+pitot rake
+
+
+
+--------------------------------------------------------------------------------
+EQUIPMENT
+--------------------------------------------------------------------------------
+
+1x photodiode (350 - 1100nm)
+1xShimadzu -- in use
+1xmini-spec (200-1000nm)
+Phantom
+
+
+
+-------------------------- SUSS Spectral Overview ----------------------------
+--------------------------------------------------------------------------------
+Dichroic 1 (UV/VIS):  DMLP650L
+Dichroic 2 (VIS/IR): DMLP900L
+UV FOV: 8mm 
+VIS FOV: 8mm
+IR FOV: 8mm
+
+--------------------------------------------------------------------------------
+---UV---
+--------------------------------------------------------------------------------
+N/A
+
+--------------------------------------------------------------------------------
+---Visible---
+--------------------------------------------------------------------------------
+Spectrometer: Acton Spectrapro 2300i
+Centre Wavelength: 775
+Grating: 150
+Camera: PIMAX4
+Gain: 50
+Delay: 80 us
+Exposure:  50 us
+Trigger level: 1V
+Slit:  100 um
+Filter: 
+Trigger: A3 cable  from trigger box port 0
+Monitor: T1 Cable 
+Aperture:  12.5 mm
+
+--------------------------------------------------------------------------------
+---IR---
+--------------------------------------------------------------------------------
+Spectrometer: Acton Spectrapro 2500
+Centre Wavelength: 1300
+Grating: 75
+Camera: IRC800
+Delay:  100us setted in DAQ with 800 counts
+Exposure:  20 us
+Slit:  1000 um
+Filter: 
+Trigger: T2 cable from trigger box port1
+Monitor: PDTP1G Cable 
+Aperture: 12.5 mm
+
+--------------------------------------------------------------------------------
+
+--------------------------------------------------------------------------------
+Shimadzu
+--------------------------------------------------------------------------------
+
+Window : BK7 Diam 209mm top
+Lens: Nikon AF Micro NIKKOR 200MM  with 780-unknown? filter
+Aperture-Number 16
+Frame Rates 500.000  kFPS 
+Exposure: 1/2
+Gain: x2(/x50) 
+Mode: External
+Trigger @:  0/0 (0-99=100frames)
+point: 10
+Delay: 0 microseconds
+Polarity: Pos
+Monitor Expose: off
+Filter:
+Cables: Trigger: H6 cable from trigger box port 1
+Monitor: H4 Cable
+ 
+--------------------------------------------------------------------------------
+PHOTODIODE 
+--------------------------------------------------------------------------------
+Location:                    Circle around stagnation point, pt5. 
+Filter:                          777nm hydrogen filter actually. not sure which one...
+Model number:         (350-1100)
+Lens:                           Unknown
+Gain:                           70
+Fibre optic cable:      Red
+Aperture:                    None
+BNC:                           A4 
+
+--------------------------------------------------------------------------------
+MINI-SPEC (200 - 1000nm)
+--------------------------------------------------------------------------------
+Location: Pt5 looking out into the flow
+Filter: none
+Window: 3mm fused silica from OGP optics.
+Cable: New red cable
+Lens: N/A
+Delay: 80 us + 8 us internal 
+Integration time: 20 us
+Aperture: N/A
+Trigger level: 1 V
+Filter: N/A 
+Trigger: A5 cable from trigger box port 0, with vis
+
+--------------------------------------------------------------------------------
+Phantom
+--------------------------------------------------------------------------------
+
+Window : side
+Lens: Nikon AF Micro NIKKOR 105 mm focus
+Aperture-Number 18
+Frame Rates 110000.000  FPS 
+Exposure: 1 us
+Gain: N/A
+Mode: External
+Delay: 0 microseconds
+Polarity: Pos
+Monitor Expose: off
+Filter:
+Cables: Trigger: B3 cable from trigger box port 2
+Monitor: H4 Cable
+ 
+
+LOG
+X2s5815
+Bad shot - very messy - oring ruptured in the secondary may have over pressurised with additional  LAB Air.
+X2s5816
+Fired at 1.32Pa instead of 13.2pa.....
+
+